ABOUT
PRODUCT LIST
RECENT NEWS
HOT KEYWORDS
CONTACT
- contact way
- ADDRESS
- Address: No.19, Filter Material Industrial Park, Fucheng, Funing, Jiangsu
Email:jszzjt@126.com
qq：604258913
World's Official Website:www.qdweijie.com - TELEPHONE
- 18361175589
- Monday to Saturday 8：00-17：30
Telephone:0515-87266087
Fax:0515-87354486
NEWS
Current of page:Home > NEWS- Quality inspection and installation notice of dust bag
- 2017/5/2 Read the number:[1100]
- Detection of dust bag:
Detection of dust bag is the process used to always pay attention to his use of quality, from the moment to buy to use a correct evaluation of the products, the product data archive, so in order to have a basis after the emergence of problems, but also monitor the operation process, reasons for the failure of the bag to carry on the analysis, ensure the dust the bag can be used normally, to achieve efficient dust removal effect.
Installation of dust bag:
Proper dust bag installation is important to the life of the dust bag. When the utility model is installed, the cloth bag can not be collided with the pointed hard object, the hook stroke and the dragging on the ground can also cause the dust collecting bag to be damaged without being repaired. Even small scratches can shorten the life of the cloth bag.
When installing dust bags, special attention should be paid to fire prevention, moisture, damage to the filter bag, and attention after installation. When loading dust bags, we should also pay attention to the weather: we must not open the door to avoid wet. In the process of installation and construction of dust bags, there is no foreign matter falling into the dust bag or bag cage. This kind of low-level mistakes can be found everywhere.
When the dust bag is installed and replaced, dust should be prevented from entering the filter bag; thoroughly cleaning the top cover of the dust collector, and thoroughly cleaning the air purifying chamber, so as to be spotless. Work and operation personnel, clothes, shoes, tools should be spotless. As long as the dust remains in the clean air chamber, there is a hidden danger. The tightness of the bag mouth and the flower board must be guaranteed. When changing bags, dust must be strictly prevented from falling into other filter bags and clean gas chambers.
A method and installation of dust bag is put into the bag room dust bag is composed of a box body plate hole, and then the opening of the upper part of the coil shape into concave, into the flower orifice plate box, and then make the spring ring along the direction of natural restoration restoration, so closely pressed on the circumference of the mouth hole for flowers finally, the bag bag cage from smooth and straight and gently insert the cover, smooth until the dust skeleton at the upper part of the pressure plate hole in the box body so far. Put in from the hole of the pattern board in the dust bag, it is best to use a waste of the dust bag, mouth or bottom cut forty cm (how much he cut a straight line in the direction), cut flowers, pad on the edge of the plate hole, the hole of the pattern board can prevent scratch dust bag.
Two. The installation of dust removing skeleton is the most careful and careful work in all installation, so it should be installed in the end.
Three, in order to prevent the cloth bag to trample bad, request each pack a cloth bag, install a dust removing skeleton.
Production operation should understand and master the immediate status and performance of dust bag. Predict the dust bag life, do a good job of dust bag replacement, including maintenance plan, bag pre order, to prevent cloth bags damaged, discharge excessive, temporary downtime.
Through the dust bag inspection and installation notes, I hope to help you -
Previous:How can the dust bag be brought into full play?
Next:Introduction of service life of dust removing skeleton